娇妻在领导粗大胯下呻呤,大地影视资源官网第二页,人妻熟女av,温府秘事h圆房

Facility-Purification
Introduction:凈化裝置介紹

The AP Hohhot Syngas Plant is situated at Tuoketuo
Industry Park, Tuoketuo county, Hohhot city, Inner Mongolia: 

空氣化工產品（呼和浩特）有限公司合成氣裝置位于內蒙古自治區呼和浩特市托克托工業園區


PRINCIPAL
ACCOUNTABILITIES（主要職責）

1.
Ensure to comply with AP and local safety, health
and environment standard, fulfill the mandatory safety requirement and
activities: safety training, safety meeting, Basic Safety Practice and all
other requirements by AP EH&S and local regulation.確保遵守AP和當地的安全、健康和環境標準,滿足強制性的安全要求和活動:安全培訓、安全會議、基本安全實踐和所有其他需求AP EHS和當地法規。2.
Monitor the serviceability of plant equipment and facilities and ensure
they adhere to safety, housekeeping and environmental requirements. 監控工廠設備和設施的服務能力,確保他們遵守安全、管理和環境的要求。3.
Responsible for purification all rotating equipment and associated
mechanical systems regular maintenance and repairing, including compressors,
pumps, fans, blowers, etc to maintain the continuous operations.負責凈化裝置所有全部轉動設備和相關的機械系統的定期維護和修理，包括汽輪機，壓縮機，泵，風扇，鼓風機等工作，以確保設施設備以及工廠的連續穩定運行。4.
Support in inspection planning, code design, regulatory compliance,
quality control standard, equipment repair, and fitness for service.支持檢驗計劃、代碼設計、法規遵從性、質量控制標準,設備維修和適當的服務。5.
Support to develop Inspection Planning and Repair Procedures. 支持制定檢查計劃和維修程序。6.
Interpretation of corporate standards as well as “recognized and
generally accepted good engineering practices” such as ASME and GB Codes and
API Documents to site.解釋公司的標準以及“公認和普遍接受良好的工程實踐”如ASME和GB碼和API文檔。7.
Performing equipment design, inspection, fitness for service evaluations
and failure analysis for mechanical integrity system Development and updating
of corporate standards 執行設備的設計、檢驗、適當服務評估和失效分析的機械完整性系統發展和更新的企業標準。8.
Response to maintenance requirements that could be scheduled or
unscheduled/emergency jobs, on 24/7 base, prompt response to requests for
assistance and putting in the time and effort to meet our customer’s
expectations.響應維護需求,可以計劃內或計劃外/緊急工作,在24/7h的基礎上,及時響應請求援助和投入時間和精力來滿足客戶的期望。9.
To be familiar with all equipment in purification Facility, maintain all
mechanical equipment accurate documents integrity and equipment history
 reachable.熟悉所有設備在凈化設備,維護所有機械設備準確文件完整性和設備歷史數據庫訪問。10. Provide hand-on technical skills at the
troubleshooting and all related maintenance work or supporting work
responsible.提供現場技術在故障診斷和所有相關的維護工作或支持工作負責。11. Perform preventive maintenance work and
support to implement Mechanical Integrity work and tasks, troubleshooting,
repair for all responsibly equipment.進行預防性維護工作和支持，以執行所有負責任設備的機械完整性工作和任務，故障排除和維修。12. Coordinate or assist of supervision the
contractor’s work in the facility to guarantee safety and quality and
reliability.協調和協助監督承包商的工作在工廠保證安全和質量和可靠性。13. Continually to drive productivity and cost
savings and enhancement through improved work process and equipment
performance. Initiate and Implement continuous improvement saving projects.不斷提高生產率和節約成本和增強通過改進工作流程和設備性能。發起和實施持續改進節約項目。14. Reporting-Time entry weekly, and prepare
technical reports either written or through entries into the resource
management system to maintain accurate documentations on the Perification
facility, and to provide information for others in the organization to carry
out their responsibilities effectively.每周報表時間條目,并且準備技術報告書面或通過條目進入資源管理系統維護準確的文件在凈化設備,并為他人提供信息組織中有效地履行職責。15. Provide mechanical system diagnostics
services in troubleshooting and resolving machinery issues using vibration
diagnostics tools and failure analysis techniques. This includes issuing
failure analysis reports and cost effective recommendations for reliability
improvements.提供機械系統故障排除和診斷服務使用振動診斷工具解決機械問題和失效分析技術。這包括發布失效分析報告和成本有效的可靠性的改進建議。16. Develop mechanical equipment job-packs for
major overhauls and repair.開發機械設備工作包，以進行大修和修理。17. Initiate and implement reliability and/or
efficiency improvement initiatives and best practices on operating machinery
and focus on CoNC(cost of non-compliance)發起并實施有關運行機械的可靠性和/或效率改進計劃和最佳實踐，并關注CoNC（違規成本）18. Provide installation and commission support
for new large machinery [eg. Compressors, Turbines.]提供安裝和調試支持新的大型機械(如壓縮機,透平機)19. Participate in the planning and execution of
minor and major shutdowns. Provide technical and hands on support as required
during shutdowns. 參與小型和大型停機的計劃和執行。在期間，根據需要提供技術和實際支持。20. Spare parts inventory review and parts
purchasing support technically, effort in plant reliability improvement.在備件庫存審查和備件購買在技術上提供支持，以提高工廠的可靠性。21. Keep abreast of and evaluate new
methodologies, work practices, for application and use within the plant. 了解緊跟并評估新方法，工作實踐，以在工廠內應用和使用。22. Assist in the development, implementation,
and periodic review of preventative/predictive maintenance programs to reduce
unplanned shutdowns and improve Perification Facility on stream capability.協助開發、實現和定期檢查預防/預測性維護計劃減少意外停車,提高凈化設施在線率。


JOB REQUIREMENTS（崗位要求）


  1.
  Be honest and responsible
  誠實和負責任
  2.
  College or university graduated higher education holder in mechanical
  engineering. 
  機械專業大專或大學學歷。
  3. 5 years of experience in maintenance and
  engineering of mechanical equipment in purification such as Steam turbines compressors,
  pumps. 
  5年凈化裝置機械維修經驗，處理過如下設備的相關問題：汽輪機，壓縮機，泵等。
  4.
  Proven knowledge of Preventive and Predictive maintenance
  methodologies and technologies.
  掌握預防性/預測性維修方法和技能。
  5.
  Possess good oral and written communication skills, preferable with
  English language.
  具有良好的口頭和書面溝通能力,更好的英語。
  6.
  Able to work independently as well as in a team player.
  能夠獨立工作以及團隊合作精神。
  7.
  Basic office software operation.
  基本的辦公軟件操作
  8.
  Strong safety awareness.
  較強的安全意識.